KE-4

KE-4	Thursday, August 7th 2008

KE-4 Electronic Control System

The KE-4 is the perfect answer to smooth and easy shift and throttle control. Suitable for most applications.

Modern Styling, single or twin engine versions. Designed specifically to meet the performance, reliability, endurance and aesthetic requirements of today's modern boats.

The table below gives an indication of the parts required for various Engine/Station combinations

Item	Part Number		Number Required
			Single Engine		Twin Engine
			No. of Stations		No. of Stations
			1	2	1	2
Engine Control (A) Lever	0511-00	Single	1	2	-	-
Engine Control (A) Lever	0510-00	Twin	-	-	1	2
Control Unit (B) 12 Volt 24 Volt	0477-00 0478-00		1	1	2	2
Actuator (C)	0165-00		1	1	2	2
Communication Harness	0615-05	?m	-	-	1	1
Control Harness (i)	0616-?m	4-40m	1	2	2	4
Harness Power Supply	0414-28	5m	2	2	4	4
Harness Power Supply	0414-33	10m	2	2	4	4
Circuit Breaker	0514-00		2	2	4	4
Cables (ii)	33c	?m	2	2	4	4

(i) Control harness Length available from 4.00m upwards (in 2m increments).

(ii) 33c Cables available from 1.00m upwards (in 0.25m increments)

A Mechanical Backup option is available – Details on request.

This diagram shows the layout for a Twin engine and Dual station system. The Control Unit (B) has a 2.00m connection cable to the Actuator (C).

Positioning of these parts will determine the 33c Cable lengths between the Actuator (C) and the engine Throttle and Gear connections and the Harness lengths between the Engine Control Lever (A) and the Control Units (B).

Twin engine installations also require a 1.00m or 5.00m Communication harness between the Control Units.

Price Guide

For a typical installation consisting of parts as per table, in relevant quantities:

Engine Control Lever - Control Unit - Actuator

(Communication Harness) - Control Harness

Harness Power supply - Circuit breaker - 33c Cables.

As cable and harness lengths vary Prices start from:

Single Engine - Single Station £1620.00

Single Engine - Twin Station £1900.00

Twin Engine - Single Station £3150.00

Twin Engine - Twin Station £3600.00

All prices subject to V.A.T. and Delivery where applicable.

We are currently offering a 10% discount on complete systems.

Information required for us to give you accurate quotation

A drawing of you installation showing:

1 Position of Control unit/s (give distance from Batteries)

2 Position of Actuator/s (must be within 2m of Control unit/s)

3 Position of Control lever/s

4 Length of each Control Harness. From Control Lever to Control Unit. Available from 4m to 20m in 2m increments and 24,30 or 40m.

5 33c Mechanical Cable lengths from Actuator to Throttle and Gear levers. From 1.00m in 0.25m increments.

6 Communication harness length from Control unit to control unit (Twin engine Only)

This Schematic drawing gives a guide (only) to a Twin Engine and Dual Station layout. (Some aspects may vary slightly).

Contact us for further information and exact prices.